Tuesday, April 23, 2013

Physicists find right (and left) solution for on-chip optics: Nanoscale router converts and directs optical signals efficiently

Apr. 22, 2013 ? A Harvard-led team of researchers has created a new type of nanoscale device that converts an optical signal into waves that travel along a metal surface. Significantly, the device can recognize specific kinds of polarized light and accordingly send the signal in one direction or another.

The findings, published in the April 19 issue of Science, offer a new way to precisely manipulate light at the subwavelength scale without damaging a signal that could carry data. This opens the door to a new generation of on-chip optical interconnects that can efficiently funnel information from optical to electronic devices.

"If you want to send a data signal around on a tiny chip with lots of components, then you need to be able to precisely control where it's going," says co-lead author Balthasar M?ller, a graduate student at the Harvard School of Engineering and Applied Sciences (SEAS). "If you don't control it well, information will be lost. Directivity is such an important factor."

The coupler transforms incoming light into a wave called a surface plasmon polariton, a surface ripple in the sea of electrons that exists inside metals.

In the past, it has been possible to control the direction of these waves by changing the angle at which light strikes the surface of the coupler, but, as M?ller puts it, "This was a major pain. Optical circuits are very difficult to align, so readjusting the angles for the sake of routing the signal was impractical."

With the new coupler, the light simply needs to come in perpendicularly, and the device does the rest. Acting like a traffic controller, it reads the polarization of the incoming light wave -- which might be linear, left-hand circular, or right-hand circular -- and routes it accordingly. The device can even split apart a light beam and send parts of it in different directions, allowing for information transmission on multiple channels.

The coupler consists of a thin sheet of gold, peppered with tiny perforations. But the precise pattern of these slits, arranged rather like herringbones, is where the genius lies.

"The go-to solution until now has been a series of parallel grooves known as a grating, which does the trick but loses a large portion of the signal in the process," says principal investigator Federico Capasso, Robert L. Wallace Professor of Applied Physics and Vinton Hayes Senior Research Fellow in Electrical Engineering at Harvard SEAS. "Now perhaps the go-to solution will be our structure. It makes it possible to control the direction of signals in a very simple and elegant way."

Because the new structure is so small -- each repeating unit of the pattern is smaller than the wavelength of visible light -- the researchers believe it should be easy to incorporate the design into novel technologies, such as flat optics.

Yet Capasso speaks most animatedly about the possibilities for incorporating the new coupler into future high-speed information networks that may combine nanoscale electronics (which currently exist) with optical and plasmonic elements on a single microchip.

"This has generated great excitement in the field," Capasso says.

M?ller and Capasso were joined on this work by co-lead author Jiao Lin, a former SEAS postdoctoral fellow who is now at the Singapore Institute of Manufacturing Technology; and coauthors Qian Wang and Guanghui Yuan, of Nanyang Technological University, Singapore; Nicholas Antoniou, Principal FIB Engineer at the Harvard Center for Nanoscale Systems; and Xiao-Cong Yuan, a professor at the Institute of Modern Optics at Nankai University in China.

The research was supported by the U.S. Air Force Office of Scientific Research, the Agency for Science, Technology, and Research (A*STAR) in Singapore, the National Natural Science Foundation of China, the Ministry of Science and Technology of China, and the National Research Foundation of Singapore. Part of the work was performed at the Harvard Center for Nanoscale Systems, which is a member of the National Nanotechnology Infrastructure Network, supported by the U.S. National Science Foundation.

Share this story on Facebook, Twitter, and Google:

Other social bookmarking and sharing tools:


Story Source:

The above story is reprinted from materials provided by Harvard School of Engineering and Applied Sciences.

Note: Materials may be edited for content and length. For further information, please contact the source cited above.


Journal Reference:

  1. J. Lin, J. P. B. Mueller, Q. Wang, G. Yuan, N. Antoniou, X.-C. Yuan, F. Capasso. Polarization-Controlled Tunable Directional Coupling of Surface Plasmon Polaritons. Science, 2013; 340 (6130): 331 DOI: 10.1126/science.1233746

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

Source: http://feeds.sciencedaily.com/~r/sciencedaily/matter_energy/technology/~3/_0lvH4V3B7c/130422143313.htm

Tsunami Lil Reese Hurricane Sandy Nyc Saanvi Venna vikings Colin Powell Tyrann Mathieu

Tuesday, April 2, 2013

iClooly Elite Multi Touch Stylus Pen works with capacitive and resistive screens and paper, too

Julie reviewed the?iClooly Multi-Touch Pen for iPad some time ago (see related links). ?That stylus had a hard tip for a resistive screen and a brush tip for capacitive screens. ?Since then, iClooly has introduced their Elite Multi Touch Stylus Pen. ?This pen still has the hard resistive tip, but the brush has been changed [...]

Source: http://the-gadgeteer.com/2013/04/01/iclooly-elite-multi-touch-stylus-pen-works-with-capacitive-and-resistive-screens-and-paper-too/

doris day buffalo sabres texas news kim mulkey sarah palin today show dallas tornado video 1940 census

Samsung SGH-i337 hits FCC with AT&T LTE bands, fits the GS 4 profile

Samsung SGHi337 hits FCC with AT&T LTE bands, fits the GS 4 profile

We have to be skeptical when new devices arrive at the FCC without photos or a blinking sign that says "I Am AT&T's Samsung Galaxy S 4." But even doubters can connect that model's dots for a certain Samsung SGH-i337 that the FCC just waved through. Why? First off, it's carrying a certain LTE band 17 used exclusively by AT&T in the US. Secondly, the dimensions line up perfectly with the device we recently got our hands on at Samsung's recent Galaxy S 4 phone-a-palooza. Finally, we already saw a device packing the same model number on UAProf, a normally reliable source that revealed a 1,080 x 1920 screen and "ARM11" Exynos processor. Since it's unlikely the carrier has another unannounced 1080p model coming from Samsung, those coveting an AT&T GS 4 can probably start warming up their wallets.

Filed under: , ,

Comments

Source: FCC

Source: http://feeds.engadget.com/~r/weblogsinc/engadget/~3/CUiAwSXykQM/

sarah burke death etta james funeral erin brockovich dodgeball 2012 pro bowl postsecret ufc on fox 2